HOW TO APPLY WRAPCART SKINS

  • The surface that a Wrap sticks to, needs to be as clean as possible.
  • It is very important to clean your device before applying your Wrap.
  • First wipe the device surface, with a slightly damp cloth.
  • Let it dry completely.
  • Pick a starting point on your Wrap on the edge.
  • Gradually peel back the backing paper exposing the adhesive side of the Wrap.
  • Line it up over the top of your device as closely as possible.
  • A good guide is to find a couple of buttons on your device close together and start applying the Wrap there.
  • Carefully apply the Wrap to the device making sure that it lines up with all the button openings and curves on your device.
  • If the Wrap does not line up correctly, carefully peel it off and try again.
  • As you apply the Wrap, firmly press it from the middle to the edges, pushing any air bubbles out from under the Wrap.
  • To make this easier, you can use a credit card or other plastic card to help apply more even pressure.
  • When applying the Wrap to curves or corners you can gently stretch the Wrap to get a very tight fit.
  • For curved surfaces and edges, we recommend using a hair dryer / lighter / candle to warm the corners of the Wrap
  • Push them down on the device using your thumb.
  • If any of the corners are lifting up, you can reheat that area and push it towards the surface until you get it settled and get a sleeky look.
  • Use the same process to apply the front skin (If you have purchased it).
  • Video: https://youtu.be/fQiJndzV1rI